How to record an Internet transmission

with Total Recorder

1. After starting Total Recorder, in the main toolbar, click the "Parameters..." button. The "Recording source and parameters" dialog appears. Indicate that you want to record "Audio", and make the following settings on the Audio tab:

• Set your recording source to Software.
• In the "Recording format" group, click the "Change..." button and specify the desired target format (see "How to select the optimal sound format").
Press "OK".


2. Press "Record". Total Recorder starts recording sound data when the Internet transmission starts.


3. Launch the Internet transmission. Make sure you hear sound from your speakers.


4. To adjust the recording volume, follow these recommendations:



• Set the recording level to 100% (+0 dB) (use "Level" slider from the "Playing volume and recording level" panel).
• Some programs have playing volume regulators that affect the recording level. If you need to set the playing volume to maximum, try to regulate the playing volume of the recording by changing the playing volume in Total Recorder (use "Vol." slider on the "Playing volume and recording level" panel) and in the System Mixer (use "System mixer..." button on the "Playing volume and recording level" panel).
• If, after these recommendations, the recording level is not acceptable, try to regulate the recording level using the "Level" slider from the "Playing volume and recording level" panel.